-1-1.png?width=300&height=50&name=www.macqueengroup.comhs-fshubfsMacQueen_Primary_Logo_Horizontal_Blue_Rev_RGB%20(1)-1-1.png "www.macqueengroup.comhs-fshubfsMacQueen_Primary_Logo_Horizontal_Blue_Rev_RGB (1)-1-1"){kind=logo}
When snow accumulates or a storm hits, you must act quickly and rely on a snowblower that combines power and reliability. This is where Larue comes in. With a wide range of products and the many options available, Larue blowers adapt to your weather patterns, environmental factors, road conditions and scale of each snow emergency.
Snow removal equipment that’s scalable to your needs. We can match you with the correct model, or help you customize a unit with our partners at Larue.
The ribbon conveyor is effective during heavy snowfalls and when snow is collected quickly. A grader pushes snow from the sidewalk into the road in a windrow that screw conveyors cannot easily collect. The slender shape of the single (larger) ribbon conveyor draws the snow in more easily. Ribbon conveyors are commonly used in mountainous regions, where light and abundant snow are difficult to trap but easy to draw in.
Larue’s smallest snow blower and the most economical; designed for tight urban settings and abundant snowfall.
Capacity: 1,400 tons/hour
Engine: Cummins F3.8 Turbo Diesel; 134 hp
Casting distance: 150 ft.
Ribbon: 28-in. (Serrated)
Economical, it’s ideal for small municipalities, versatile and able to blow to the side.
Capacity: 1,800 tons/hour
Engine: Cummins F3.8 Turbo Diesel; 173 hp
Casting distance: 150 ft.
Ribbon: 32-in. (Serrated)
Built for small municipalities, versatile and able to blow to the side.
Capacity: 2,400 tons/hour
Engine: Cummins QSB6.7; 235hp
Casting distance: 150 ft.
Ribbon: 32-in. (Serrated)
Created with the needs of municipalities and contractors in mind, the D55 is ideal for blowing snow windrows.
Capacity: 3,000 tons/hour
Engine: Cummins B6.7
Casting distance: 150 ft.
Ribbon: 36-in. (Serrated)
A city snowblower with a ribbon conveyor, the D65 provides high performance for blowing snow windrows.
Capacity: 3,500 tons/hour
Engine: Cummins B6.7
Casting distance: 150-ft.
Ribbon: 40-in. (Serrated)
The paired screw conveyor is effective against hardened snow and ice. The two augers grind the debris. A screw conveyor is your best ally when widening roads.
Larue’s smallest screw conveyor blower. Ultra versatile, it is ideal for small municipalities and permits blowing to the side.
Capacity: 1,800 tons/hour
Engine: Cummins F3.8 Turbo Diesel; 173 hp
Casting distance: 150 ft.
Screw Conveyer: Heavy-duty 17-in. augers (2)
Economical, it’s ideal for small municipalities, versatile and able to blow to the side.
Capacity: 2,400 tons/hour
Engine: Cummins QSB6.7; 235 hp
Casting distance: 150 ft.
Screw Conveyor: Heavy-duty 17-in. augers (2)
The D50 is designed for municipalities or contractors who want to combine performance and maneuverability; ideal for hard and icy snow.
Capacity: 3,000 tons/hour
Engine: Cummins B6.7
Casting distance: 150 ft.
Screw Conveyer: Heavy-duty 20-in. augers (2)
The D60 is a city blower with two ultra heavy-duty large augers. It provides high performance in hard, icy snow conditions.
Capacity: 3,500 tons/hour
Engine: Cummins B6.7/L9
Casting distance: 150 ft.
Screw Conveyer: Heavy-duty 26-in. augers (2)
Designed for dump sites, these are the most powerful snow blowers on the market.
The D87 blower combines reliability and performance. Its high capacity makes it a benchmark in the market for operating in large snow dump sites.
Capacity: 7,000 tons/hour
Engine: Caterpillar C18 Tier 4F
Casting distance: 180 ft.
Impeller: 6 blades; 70-in. diameter
The D97 is Larue’s biggest snowblower for snow dump sites. This new model is high performing and has a HUGE capacity.
Capacity: 8,500 tons/hour
Engine: Caterpillar C27 Tier 4F/
Caterpillar C32 Tier 4F
Casting distance: 180 ft.
Impeller: 5 blades; 70-in. diameter
When you choose to work with Bell Equipment, you’re not just buying a piece of equipment, you are buying into the Bell Equipment—full-service, total customer ownership for the lifetime of your equipment.
Every piece of equipment comes standard with product training from the true experts in the industry, covering proper operation, safety, and maintenance.
We aren’t big on making promises, but when it comes to parts support, we promise to be there when you need us. We have several locations in the Midwest that carry the parts you need for your equipment. If you need on-site parts support, just contact us.
Service support is our number one priority. Our service centers feature factory-trained technicians, detailed maintenance plans, and fast turnaround times. From the moment of purchase until the very last run, our team is available with service support.
Your equipment will last a long time, and we look forward to being with you every step of the way. Questions? We can help. Troubleshooting? That’s our specialty. Lean on our team when your team needs a hand.
Did you know that Bell Equipment offers used equipment for sale? Every piece of used equipment comes with a refurbishment and inspection report, product training specialists, service support, and a conditional warranty.
.png){kind=logo}
